Wrekin Water Filtration Aquasoft Softeners Water Softener Parts
Facebook tiktok Instagram YouTube LinkedIn
THE place for YOUR Water Treatment Products
Call: 01948 710699
Mon-Fri 9:00am-4:00pm (Closed Bank Holidays)
Answer phone service at all other times
We'll be closed from 12pm on Fri 22nd Dec '23 until 10.30am on Tue 2nd Jan '24. Last posting date is Thu 21st Dec '23.

You can still call to leave a message.
We'll be closed from 1.30pm on Thursday 28th Mar '24 until 10.00am on Tuesday 2nd Apr '24.

Enquiries can be emailed via the link on the left or you can call and leave a message.
EXPERT ADVICE • QUALITY PRODUCTS • OUTSTANDING SERVICE
Home | What We Do | Our Team | Testimonials | Community | Blog | Contact us

ALL DEPARTMENTS ...


OUR BRANDS ...


2 Wem Moss
Bettisfield
Whitchurch
Shropshire
SY13 2LT

Pentair PH Correction System, Autotrol 263 Filter valve with 740 Contoller on 10in x 54in Vessel full details...

Pentair PH Correction System, Autotrol 263 Filter valve with 740 Contoller on 10in x 54in Vessel full details...

Pentair
  • Autotrol 263 Filter Valve
  • 10in x 54in Cylinder with Dome Hole for topping up media without need to remove the valve
  • Complete with 50 kgs of Correction media
  • Supplied un-assembled
  • Full technical Support available
Related products:- Private Water Treatment - Click to see all PH Correction Systems - Click to see all
Additional info:- Product options:-
*Incl. standard delivery to all UK Mainland Postcodes. (Excl. Highlands)      
Code Details *Price Incl VAT  
5002049525 C0281 PH Correction unit 263/740 50L 10 x 54 with Dome Hole and Juraperle Media 0.7m3/h £840.00
(£700.00 Ex VAT)
 
5002049525 C0869 PH Correction unit 263/740 50L 10 x 54 with Dome Hole and Juraperle/ Corosex mixed Media 1.3m3/h £900.00
(£750.00 Ex VAT)
 
*Incl. standard delivery to all UK Mainland Postcodes. (Excl. Highlands) If you are ordering from outside the UK, please call us on +44(0)1948 710699 for our most competitive shipping rate Product details:-
  • PH Correction unit for 50 kgs of Media.
  • Valve has 1in ports for good flows.
  • Timed controller for backwash 1-21 day cycles
  • Dome Hole Vessel for easy top up
  • Min pump flow of 1.8m3 required for backwash cycle
  • 1in BSP ports

    pH Correction

    Water in which the pH is below 7 is acidic. Acidic water accelerates corrosion in pipe work, causes staining of baths, sinks and other appliances and can leave a distinctive metallic taste to the water.

    pH correction media

    Water with a pH below 7 is acidic and has a corrosive nature. Acidic water corrodes the copper pipe-work and heating systems found in domestic and industrial plumbing systems. The copper dissolves out and is deposited on fixtures and fittings leaving unsightly green stains. Raising the pH will neutralise the water stopping the corrosivity, removing the metallic taste and can also reduce any iron or manganese contamination.

    The simplest way to raise the pH of water is to pass the water through a vessel containing slowly dissolving calcium and magnesium salts. These salts slowly dissolve into the water 're-mineralising the water and naturally raising the pH. The water can be simply passed through the media through an in/out head or through an automatic backwashing filter head. The backwashing head has the advantage of remixing the media and also removing any debris or iron or manganese which may have been oxidised out of solution as the pH increases.

    There are vessel dome holes options in which the pH media can be topped up without having to take off the valve.

    Juraperle
    Juraperle is a granular media made up of 99.4% calcium carbonate. It has a superior performance to limestone due to its micro-crystalline structure. It dissolves very slowly, is free from soluble constituents and has a low silica content. Juraperle is consumed and from time to time new media should be added.

    Corrosex
    Corrosex is a highly reactive magnesium oxide salt and is used most effectively where the pH correction is substantial or the flow rate is high. In reality for a pH of less than 6 a 25% Corrosex, 75% Juraperle mix is ideal.

    Backwash Flow Requirements
    10x54 = 1.6m3/h
    13x54 = 2.3m3/h

  • © Wrekin Water Filtration Ltd 2024, UK Company Registration Number: 11000488 - Trading Terms & Conditions - Website Terms & Conditions - Website Privacy Policy - Site by Linxdesign
    © Wrekin Water Filtration Ltd 2024, UK Company Registration Number: 11000488 - Trading Terms & Conditions - Website Terms & Conditions - Website Privacy Policy - Site by Linxdesign
    © Wrekin Water Filtration Ltd 2024, Reg: #11000488 - Trade T&Cs - Web T&Cs - Privacy - Site: Linxdesign